1-877-397-7867

Fire Retardant & Flame Retardants Products By Flame Stop® Inc.
Protect WoodProtect FabricThatch

QUESTIONS?
CHAT LIVE WITH A REPRESENTATIVE!

Fire Retardant Caulk and Putty

Download Tech SheetFlame Stop® V™
Life-Saving Putty & Caulk

Flame Stop® V Putty™
With a dough-like consistency, Flame Stop® V Putty is simple to use. Just roll it between your fingers for use in readily-accessible penetrations.

Flame Stop® V Caulk™
Designed for larger areas, Flame Stop® V Caulk can be trowelled with any application tool or can be dispensed with a mechanical or pneumatic application system. It contains no water, or other evaporative elastomers; therefore, it does not shrink, crack, or slump, and maintains superior adhesion qualities.

Fire Protection Systems For:

  • Electrical cable trays
  • Structural steel columns
  • Commercial building
  • Piping and conduits (plastic and steel)
  • Industrial clean rooms
  • Critical equipment
  • Bus bars
  • Glass piping
  • Most forms of nuclear plant penetrations
  • And many others

Advantages

  • Low installation cost
  • Easy to use
  • Non-toxic
  • Non-flammable
  • No shrinkage
  • No mixing or fixtures required
  • No carcinogens or asbestos
  • Immediate job inspection
  • Guaranteed one-year packaged life
  • No special tools required

Typical Specifications

  • Electrical Systems FS518W, FS519W, FS523W, FS502, FS505
    UL Systems CBJ1024, CAJ8011, CAJ3034, FC3004, ULC System SP208
  • Mechanical Systems (Steel) FS506, FS520W
    UL Systems CBJ1024, CAJ8011, CAJ5014, FC1004, FC5001, CBJ1025, ULC System SP 207
  • Mechanical Systems (Plastic) FS504, FS521, FS522, FS524, FS525, FS526, FS513, FS514, FS516, FS517
    UL Systems CBJ2004, FC2006, CBJ2003, ULC System SP209
  • Floor or Wall Joints FS503
    Other Systems available upon request
  • Flame Stop® V meets the following code requirements: Council of American Building Officials, ICBO #4605, BOCA
    SBCCI, UBC, UFC, NFPA Life Safety Code 101 & LA #25005
1-877-397-7867
Trained specialists are available from Monday – Friday, 8AM – 4PM CST to answer your questions. For after-hours inquiries please email us at sales@flamestop.com and we will respond the following business day.

Installation
Remove loose dirt and other foreign matter from penetration surfaces.
Install damming material (any damming material may be used in the installation).
Place required amount of Flame Stop® V Putty or Flame Stop® V Caulk into penetration (depth requirements may be as little as 1/2", depending on the penetration).
Flame Stop® V should be painted after installation if it will be exposed to rain or excess water.

Maintenance
A Flame Stop® V sealed penetration is maintenance-free, as long as the seal is not compromised. If additional penetrating items will be added after the firestop is in place, simply cut away enough of the putty to allow entry and reseal with a new Flame Stop® V application.

Properties
Tested to ASTM E814, ASTM E119, IEEE 634, and UL 1479 (test data available upon request).

More competitive per volume installed than all other rated products.

Intumescent (expands when heated) to allow closure of melting plastic pipe or plastic coated wire during a fire.

 


1-877-397-7867

ABOUT US | PRODUCTS | TECH SHEETS | FAQ | CONTACT US | DISTRIBUTORS | PRIVACY POLICY | HOME

COPYRIGHT © 2012 Flame Stop® INC.
Any unauthorized use, reproduction, or infringement, without the expressed
written consent of Flame Stop®, Inc. is strictly prohibited. All rights reserved.